#Range guard installation manual install

When the unit is plugged in, the control panel will illuminate in a minute tone or sound to clear off button. Your oven range you are now ready to plug in your LG gas range. Then slide the oven range into its position and adjust the front legs as necessary to level. Turning clockwise, raises the leg, and counterclockwise, lowers it. So that the oven range countertop matches and is flush with your counters. Before putting your range into its cavity space, use a wrench to adjust the rear leg. If not, flip to the open vertical position. And confirm that the valve is in the open vertical position. Check for this valve by pulling the valve protector off from the regulator. This valve needs to be in the vertical position. On the lower back part of your LG gas range oven. If you prefer, have your technician set this up as well. If the wall contains any metal studs or similar materials, then the floor must be used. The screws must enter into a wood still plate. Or rear wall installation, use the 2 screws provided to secure the bracket using the pair of mark holes at The LOC C-location as shown here.

#Range guard installation manual install

To install onto wood floors, you use the screws provided to secure the bracket using the pair of marked poles.ДЇor concrete floors, use a concrete bit, drill a 5/32' pilot hole 2' inches deep into the concrete at the center of each of the marked holes, use the screws provided to secure the brackets into the floor.

The bracket must be screwed to either the floor or rear wall. If the range does not reach the rear wall, align the back edge of the bracket with the rear panel of the range in its final location. Place the bracket on the floor with the bracket edge against the rear wall. And be sure to remove all packaging materials that came with your LG gas range.ДЄn anti-tip bracket comes with your range along with the template and instructions.Дetermine the final location of the range before attempting to install the brackets. Your installation requirements should be expressed to the Installer before they begin installation. The LP conversion kit which includes the required parts and instructions is provided with your LG gas range which can be found attached on the back of it. You should NEVER handle, perform, service, or attempt to install, any gas connections or gas lines for your safety.ДЄll LG gas ranges are setup for natural gas use, but can be converted to LP gas setup depending on your household needs. Gas Range Installation - LG Range ДЄfter purchasing your new LG gas range, installation and service must be performed by an authorized: Licensed installer, Service agency, or Gas supplier.